PDA

View Full Version : GRT J-bar



dirtdevil
05-14-2010, 08:15 PM
Older car - a 2000. What should J-bar length be for the one that goes to outside of frame?

Thanks

clm15
05-14-2010, 09:05 PM
The bar is to be in line with the coil over on the frame side. The legnth would be 19.5.
Older car - a 2000. What should J-bar length be for the one that goes to outside of frame?

Thanks

GRTLRBITE
05-15-2010, 07:42 AM
19 1/4 Standerd, From Inside And If Running Outside Of Bracket Measure Then Add To 19 1/4

dirtdevil
05-15-2010, 08:37 AM
Thanks for the replies.

sj valley dave
05-17-2010, 05:32 PM
Joe at GRT did tell me if you had an older car and ran the 33/35 axle combo, compared to the current 34/35 axle combo, that the original j bar was 18 1/4". So you might want to double check!