PDA

View Full Version : pinto spindles/rotors



hoosierdaddy48
05-19-2010, 04:02 PM
i already have a 60" housing with 5on 43/4 bolt pattern. is there a rotor made for pinto spindles that will match? or do i need to get the 5x5 hubs?

Smiley1
05-19-2010, 04:22 PM
The Granada rotors I believe are a direct fit on the pinto spindles and may be a 4 1/2 or 4 3/4 already.

JustAddDirt
05-20-2010, 08:32 AM
The Granada rotors I believe are a direct fit on the pinto spindles and may be a 4 1/2 or 4 3/4 already.

Granadas will be drilled at a 5X4 1/2. Ford never used a 43/4 bolt pattern. so they will either have to be machined, or ordered as a 43/4 bolt circle.
If you get Afco's hybrid roter (metric rotor machined for Ford spindle) they will be 5x43/4 and 5x5 but big studs ae already in the 5x5 pattern.

loneranger22
05-20-2010, 08:47 PM
Check with most any street rod suspension manufacturer, check a mag like Street Rodder on a news stand.. They almost all list rotors for Pinto spindles with 4 3/4 bolt circles.