View Full Version : 350 SBC Stroker
What are the drawbacks to stroking out a 350 GM block engine to 383 or 396 cubic inch to increase HP with a 23* head rule?
05-23-2010, 03:44 AM
none at all
05-26-2010, 06:26 AM
depends on what kind off 23 degree heads and have any work been done on the heads and what kind off cam is it roller
Pro 1 Aluminum Heads, not ported. Can go either way on the cam, flat tappet or roller. Please give me your thoughts. thx
Powered by vBulletin® Version 4.2.0 Copyright © 2017 vBulletin Solutions, Inc. All rights reserved.