PDA

View Full Version : peoria gearing?



slingindirtupstairs
05-24-2010, 08:02 PM
what gear would be a good gear to get me around that place?

9WRACER
05-24-2010, 09:00 PM
some are at 6.50-6.83 depends on the motor as some of the bigger motors use a little less, Pooter, am I close as I haven't ran a street stock there in several years.

BSauder89
05-24-2010, 11:23 PM
Ive heard as low as 6.20 then up to 7.33.
I personally have ran a 6.33, 6.50, and 7.33
7.33 would be the way to go if it was going to go a tacky track but seeing we are racing the night before you do the math

stock car driver
05-25-2010, 07:28 AM
Im sure theyll tear it up right after the races sat night and start getting some water in it!

I was told one gear deeper than East Moline?

hogracer3d
05-25-2010, 09:50 AM
Our sister car is gonna come play with you guys at Peoria, give em hell--lol


go 50

slingindirtupstairs
05-25-2010, 04:18 PM
if I had a 6.33 with a decent 383, what do you think i would turn?

BSauder89
05-25-2010, 07:39 PM
Jeff: You don't know Peoria. It can be tore up for 3 days and still get dry in heat races.

And about the 633. If you have a Stout 383 then I would say 6300-7000

stock car driver
05-25-2010, 09:22 PM
Jeff: You don't know Peoria. It can be tore up for 3 days and still get dry in heat races.

And about the 633. If you have a Stout 383 then I would say 6300-7000

I was told if its dry its a one laner on the bottom and junk racing....

That they do all they can to keep it heavy?