View Full Version : Rayburn j bar question
05-26-2010, 10:21 PM
Have a 104 underrail on swingarms. Switching from the warthog and long purple bar to a j-bar. Was wondering what a good starting point is on the pinion bracket...centerline of pinion or should i be above it an inch or so,and a good starting angle on the j-bar itself. Never messed with a j-bar so any help would be greatly appreciated. Thank you
05-26-2010, 11:29 PM
Have mine on the bottom hole on the pinion, only have 1 hole on the frame, can get that height tomarrow, and 22.5 " long.
05-26-2010, 11:43 PM
i believe its 9 inch from the bottom of frame
05-27-2010, 05:43 PM
I think its 9.5" from the bottom of the frame rail. Bottom hole on pinion when its slick middle for nuetral and top for rough.
05-27-2010, 08:06 PM
Im running on a high banked 1/4. Would that make any difference on where to start. thanks again for the info
Powered by vBulletin® Version 4.2.0 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.