PDA

View Full Version : Which Mastersbuilt is best



stevo
06-13-2010, 05:06 PM
Which Mastersbuilt for slick track ?

racer41
06-13-2010, 07:43 PM
the gen x chissis

23m
06-15-2010, 07:38 AM
ya gen x is best for all conditions as long as you got some ponies under the hood, they dont like little motors though.. the car takes alot of power to turn it i found out!

bizkit
06-15-2010, 09:31 AM
I've got a 600+HP spec engine with a 12" spoiler and a gen-x. 4-races, 1 win, 2nd, 5th and a 10th. They are tight though

Matt49
06-15-2010, 10:31 AM
ya gen x is best for all conditions as long as you got some ponies under the hood, they dont like little motors though.. the car takes alot of power to turn it i found out!

Enough stagger and it will turn with 5HP Briggs in it :D

left-rear
06-15-2010, 10:11 PM
Enough stagger and it will turn with 5HP Briggs in it :D

lol,,,,,,,,,,,,,,,,,,

LM1122
06-18-2010, 03:52 PM
A rocket LOL :p

Rocketman09
06-18-2010, 05:07 PM
A rocket LOL :p

I sold my rockets bc they handle like crap. If you have an open motor get the Gen-X, if not i wouldn't be afraid to get the 2010 Smack

kevin28
06-28-2010, 03:00 PM
I run a 2 barrell steel engine in an gen-x ran 6 races with it so far got a 2nd couple a thirds and a 4th..Still got a little tweekin to do to the car and a lot of tweekin to do to the driver and think it;ll be no problem to win with consistently...

2dumb2kwit
06-28-2010, 04:39 PM
I've got a 600+HP spec engine with a 12" spoiler and a gen-x. 4-races, 1 win, 2nd, 5th and a 10th. They are tight though

Can I borrow it?:D LOL

perfconn
06-28-2010, 05:35 PM
You don't want to borrow an engine that is 80hp less than a good steelhead.

50j
06-29-2010, 08:05 AM
I agree with the others. The gen-x chassis is the way to go.

diplomunity
06-29-2010, 09:04 AM
you say they handle like crap because your driving style doesnt favor them. you probably are an easy in hard off racer but a rocket kinda needs to be put into the corner hard and powered through the middle.

racer99fan
07-04-2010, 06:54 PM
u have to drive a rocket like u stole it

late96
07-04-2010, 09:06 PM
So who makes the best easy in smooth off??

keith94elliott
07-07-2010, 06:54 PM
call moyer & get a vc.

racer99fan
07-08-2010, 08:45 AM
bloomquist but u have to buy to win u get his cars or get the new tnt car its been wining a lot off races this year

C10
07-11-2010, 04:07 PM
Beware of the Gen X if you are running a hard small spec tire. We have two of these cars in the same "team" and neither go forward, lack forward bite, side bite. They drive great! But even Kieth himself said the hard tires dont work well with them

mbilt1
07-11-2010, 09:03 PM
C 10 You yourself talked to Keith Masters and he told you that?

pmc motorsports
07-12-2010, 11:43 AM
C 10, I totally disagree with your statement we have 2 Gen X cars and we run on a punch 60 tire rule and these cars are tight as they come

C10
07-15-2010, 01:22 AM
It was not said to me directly, no. It was said to the car owner. Not trying to bash Mastersbilt in any way, just sharing the experiences of one team that is having the same issue with 2 different cars.

kevin28
07-15-2010, 09:02 AM
I would have to to disagree,also.I've never not had forward bite with mine,no matter how slick..I did have to put the short bar on the right bottom for more side bite on super slick tracks..I have to punch 60 also.biggest problem I have is being to tight sometimes witch they told me may be a problem since
I run all steel and 2 barrel.But making small changes every week ,we are
top 5 car almost every week..if i get it loosened up for qualifying,then we
may even grab a win in it before long..Great car go with the gen -x..