PDA

View Full Version : RR Bar Angles



racehard24
06-30-2010, 08:49 AM
Just trying to learn a little more on the RR bars and on a 4-bar. When the Bars from the Birdcage to the chassis are angled inwards does this make the car looser or tighter and vise versa. Just trying to see if they should be angled inward or outward and what the effects are in the corner. Thanks.

fortner15
06-30-2010, 05:16 PM
You can run the bars inward to chassis to give more roll steer depending on lower bar angle. You can also tune the upper bar for more rr spring index as the car rolls over the bar is staighten out giving more index.

racehard24
06-30-2010, 05:44 PM
which way to give the RR spring more index

Egoracing
06-30-2010, 06:34 PM
Go to Integra's web site and go to the tech section.

Vardarfrals
06-30-2010, 07:35 PM
In a bar graph, is it possible to make individual bars specified widths?

Thanks in advance