Mastersbilt spindles

[V1SLM]

I have a '05 round tube Smackdown and want to know what type of spindles are supposed to be on it, the spindles i have on it are 8" tall on both sides. It has 8-1/4" right upper, 18-5/8" right lower, and standard upper and lower on left side. Front end settings are as Masters call for on caster and camber. When I countersteer thru the turns it will not jack any weight in the left rear. I'm thinking either the spindles are wrong or bent or both. Thanks for any advice. Spence

[MasterSbilt_Racer]

If you are measuring those spindles from outside to outside on the balljoint bosses, they are too short. Call Keith and Tader and get the latest spindles.

[V1SLM]

thanks for the info!