PDA

View Full Version : rear percentage



rc51
07-12-2010, 03:52 PM
how much is too much rear percentage in a latemodel for a dry slick type set up???? thanks for any thoughts or help on this

RCJ
07-13-2010, 06:20 AM
We have been tring different %.Going from 55% to 53.4% made the car faster at apex but did hurt forward bite.If we can get the forward bite back with bar angles it will be faster everywhere.

rc51
07-13-2010, 08:18 AM
thanks for your help RCJ. i think we are going to try something a little bit higher than 55% and see what happens? put the bars and everything else like we would for a heavy track and play with it? any thoughts on that? thanks for your help.

MasterSbilt_Racer
07-13-2010, 09:02 AM
There is no one correct answer for this. If it is a momentum track, you will likely be faster with a lower rear percentage. If it is a stop and go and you are drag racing off the corner, you might like 58%.

diplomunity
07-13-2010, 09:53 AM
i like between 55 and 57 but do prefer the lower end of the spectrum for bite and work on finding my bite in other ways than rear percentage.

rc51
07-13-2010, 01:50 PM
i knew i could count on you guys for some great feedback and help on this issue. i have got to get my tail wait up big time. thanks so much.

MasterSbilt_Racer
07-13-2010, 02:02 PM
I have seen everything from 53% to 58% win races. It is all in the track and what you are trying to do.