PDA

View Full Version : Mastersbilt set-up help



lemke7
07-16-2010, 11:27 PM
Have an 08 masters with 09 frontend. Running an all steel motor 1300 hoosier on a 3/8 high banked track that gets a little dry. ? Is what do you think about springs I'm running? LF 525. RF 375. LR 200. RR 250. 125 lbs of bite. Any advice would be appreciated. Thanks

dchamp3
07-18-2010, 01:56 AM
So whats the problem?

lemke7
07-18-2010, 09:06 AM
Car was loose before with 225's on back with a 400 on RF. Also didn't have any forward drive. So we changed it.

lemke7
07-18-2010, 10:39 AM
Car was loose and had no drive before changing. Had a 400 RF and 225's on back.
So whats the problem?

MC_08
07-18-2010, 05:40 PM
what do you have for a 5th coil? we run a 5/3 shock with a 375 spring put 5 to six turns of pre load you will feel a big diff in the car

lemke7
07-18-2010, 05:55 PM
Will give it a try. What do you think about the springs we changed to?
what do you have for a 5th coil? we run a 5/3 shock with a 375 spring put 5 to six turns of pre load you will feel a big diff in the car