PDA

View Full Version : mastersbilt gen X ?



MasterSbilt65
07-19-2010, 06:47 AM
looking for measurement from frame rail to fuel cell(car drifts up track no side bit or drive off corners ) rear end tails out down straightaways right off the setup sheet any advice thanks

bizkit
07-19-2010, 09:09 AM
You have to much rear steer in the car

MasterSbilt65
07-19-2010, 09:15 AM
what does a person do to fix this?

hall99
07-19-2010, 09:26 AM
Shorten right side bars and or lengthen left side bars, bar angles with effect this as well.

Some people agree and others do not but shortening right side bars and reducing rear steer is one of the first things we depically do as the track dries out. Seems like anytime I get away from doing it I really start chasing the setup on the car.

JMO
Hope it helps.

jedclampit
07-19-2010, 01:41 PM
what does a person do to fix this?

Take angle out of bars toward front of chassis, lower links have more effect.
Which to lower depends where they are now and attitude of car.
If rear steer is the problem amount of lr drop can also make a big difference.

dchamp3
07-19-2010, 11:15 PM
What is your drop on the lr ?

MasterSbilt65
07-20-2010, 01:07 PM
the lr drop is 13 another problem we are facing is when trying to get lr in the car are right height on the lr will go over 8.5 right around 75 pounds of lr we have moved weight around and add weight still same problem how do you get it to take 110 pounds of left rear and stay under right heights

MasterSbilt_Racer
07-20-2010, 01:28 PM
the lr drop is 13 another problem we are facing is when trying to get lr in the car are right height on the lr will go over 8.5 right around 75 pounds of lr we have moved weight around and add weight still same problem how do you get it to take 110 pounds of left rear and stay under right heights

You have to adjust all 4 corners in concert. Turns off rr and lf, turns on lr and rf. That will keep the heights close.

dchamp3
07-20-2010, 11:13 PM
Get lr drop down to 12 3/4

powerslide
07-21-2010, 01:51 PM
call masters

JustAddDirt
07-21-2010, 04:31 PM
call masters

812 793 3666

MasterSbilt65
07-22-2010, 08:28 AM
the bars on this car right know are lerft side lower 4th hole/upper 3rd hole right side lower 3rd hole/upper 4th hole