View Full Version : 700/2000 shaw p/b spring
08-01-2010, 11:33 AM
any feedback on this spring good or bad? we are on a 900-1300 and our car doesn't have initial forward bite on slick but the bite really comes in at the flagstand..we recently increased p/b angle up to 20 1-2 degrees but would like more initial bite on our shaw. thanks.
08-01-2010, 12:28 PM
I have had some really good runs with mine. It's the $hit on a slick track. For heavy harmmer down or rough tracks I like the biscuit bar better, but for slick or smooth the 700-2000 spring bar. I also bought shaws pullbar and it is a really nice piece!
08-01-2010, 12:43 PM
I've got 700/2000 spring that I would probably sell, only 3 nights on the spring from Shaw. I paid 85 plus shipping, would take 50 plus shipping. Let me know if your interested, driver didn't like the feel of it. Thanks
08-08-2010, 07:28 AM
Spring has been sold and on its way to the new owner. Thanks
08-08-2010, 07:30 PM
the 700-2000 is what we run on our 07 shaw it har a crazy amount of traction on the slick but tends to make the car hop on tacky track
08-08-2010, 08:13 PM
how much pre load are you using..thanks
08-08-2010, 08:59 PM
started with a half a turn but found that about 4 turns works better for my car
08-09-2010, 08:42 AM
I have one with 30 laps that I will let go for $60 plus shipping. Just didn't work on ours.
08-09-2010, 11:48 AM
i have to agree, this spring is the $hit in slick conditions....if you are going to run one take the biscuits out and only pre load 1/4 in on a 1/4-3/8 track and 1/2 on a 1/2 or bigger track..
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.