PDA

View Full Version : Need Setup Help Camaro



jason17
09-05-2010, 11:14 AM
loose all the way around corner no side bite or forward bite lf spr 1100 rf spr 1200 lr spr 250 rr spr 225 lf shock 6/3 rest are 5s left#51% cross53% rear55% 125#lr

dirt2
09-05-2010, 10:08 PM
loose all the way around corner no side bite or forward bite lf spr 1100 rf spr 1200 lr spr 250 rr spr 225 lf shock 6/3 rest are 5s left#51% cross53% rear55% 125#lr

Sounds like the car does not have enough left
side weight and not enough left rear bite.
If you would like you can contact me at
[email protected] & i will help you with the
setup.
dirt2

gadirtracer
09-06-2010, 12:26 AM
loose all the way around corner no side bite or forward bite lf spr 1100 rf spr 1200 lr spr 250 rr spr 225 lf shock 6/3 rest are 5s left#51% cross53% rear55% 125#lr

Not much info....Tires, surface, flat or banked.
"loose all the way around corner"=Too much stagger.
Stiffen RF spring, I like a 1,400# in a 3,100# Camaro.
Bump bite up to 150 to 170.
If track is smooth, put a 3 shock on RR.

jason17
09-06-2010, 12:50 AM
tracks like sand not much banking run hoosier 8 inch tires 1 1/2 rear stager track is always rough thanks

gadirtracer
09-06-2010, 03:48 AM
I'd try the stiffer RF. Many will disagree and claim it will loosen entry too much. This has not been my experience. Had the same issue you are having.
Remember, 1 change at a time or you will not know what worked.