View Full Version : Mounting brake caliper brackets on a new floater
10-17-2010, 06:22 PM
I bought a new 58" floater and I need to mount the brake caliper brackets. It a metric car and if I knew what I know now I would have bought a 60 incher. If I mount the calipers behind the axle they are close to the frame and I have shock clearance problems. Any issue with mounting them about the 4 o'clock position on the front of the axle? That looks like the only place that would eliminate ANY chassis interference and it would aleviate my shock clearance problem.
10-20-2010, 10:04 PM
thats where mine are... but i think your looking at your clock backwards, looking at the end of the axle (from the wheel well) the centerline of the mount is about 8 o'clock position, definitely more clearance mounting this way than any other position.. and i run a 62" centered,i wouldnt really recommend narrower than 60
Powered by vBulletin® Version 4.2.0 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.