View Full Version : Swing arm or Zlink
racing77
11-29-2010, 04:36 PM
I have a 07 Rayburn with a zlink rr and a swingarm left rear.springs on the rear are 300on rr and 350 lr.500 on both fronts.Thinking about zlink left also and put 225 on both rears. I also use a pull bar.Will the car be flat or lift ? Is this a good idea?
F22 RAPTOR
11-29-2010, 06:13 PM
I have a 07 Rayburn with a zlink rr and a swingarm left rear.springs on the rear are 300on rr and 350 lr.500 on both fronts.Thinking about zlink left also and put 225 on both rears. I also use a pull bar.Will the car be flat or lift ? Is this a good idea?
It should still lift regardless, as long as you maintain the same bar angles. I hope to experiment with Z-link on both sides, but those I've talked too say that SwingArm LR and Z-link RR seems to work better. Hey, dare to be different you may discover something, I don't see why it can't work as well as any other combination. Although 225 springs sound too soft for a Z-link setup. JMO
I have a z-link on the l/r.It does lift maybe 4 or 5'', would proably lift more with a swing arm.We were testing one night I adjusted it to get higher, looked a lot better, slowed down .20 per lap.
racing77
11-30-2010, 07:31 AM
I also have a lift arm I could use instead of pull bar.The track we race on has alot of banking and dry
We started with a pull bar then switched to lift arm.The driver said the pull bar hit hard but it was harder to maintain traction.The lift arm was smoother and worked better on entry.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.