PDA

View Full Version : 9 inch stock rearend?



tucker71
12-02-2010, 08:33 PM
how do you keep it from leaking some gear oil out of the axel tubes on a stock 9 inch.

tucker71
12-02-2010, 08:34 PM
it also has new seals in it and still leaks some.

nosgsvette
12-08-2010, 09:24 PM
do you have inner axle tube seals, they go in the axle tube closest to the gear, keeps fluid from getting into the axle tube

tucker71
12-08-2010, 10:01 PM
i bet it dont. so i guess you have to take the pumpkin out to put those in ? do you know where you can get them ? autozone or race shop?

SouthernCross47
01-10-2011, 09:06 PM
race shop or online , don't waste your money on the cheap ones will slide to end of the tube.

hoosierdaddy48
01-11-2011, 10:14 AM
I believe the inner seals only work on a floater rear, I could be wrong. is your rear end leaking from both sides or just one?

dirty white boy
01-11-2011, 04:28 PM
if you stop grease from gettin in the tubes wont the outter axle barring go dry,get hot,lock up,make bad day for ya???

do you have a vent on your rearend?? is it stopped up with dirt an grimm??

tucker71
01-11-2011, 07:34 PM
mostly the rr. it has a small vent on it maybe its not big enough. for sure dont need any bad days lol thanks for your advice mine is a non floater im not sure if you can run them on them or not?

Dirtrunner35
01-11-2011, 08:34 PM
I had inner seals with my stock axles on a 9 inch.

tucker71
01-12-2011, 08:27 PM
thank you guys