PDA

View Full Version : The Sledge Hammer Ignition Setup



ep33510
12-12-2010, 10:58 AM
The Sledge Hammer Ignition Setup

This is only for the Serious Racer that takes pride in their racing program and wants only the very best possible performance solutions. TechWest Racing Services during last seasons R&D testing process, came up with a deadly ignition setup for its in house racer group. We would like to offer this same system to the racing community for the 2010 racing season. If your currently running an MSDŽIgnition 6 series analog box with a Blaster 2 coil. And if your competition has the same setup as yours, here’s your chance to take your program to the next level. Consider this, you could have access to a package that has the same foot print as a MSDŽIgnition 6AL with a 30% greater energy output. With the matching coil this setup has made a major difference in all platforms tested. Its does not matter if you are running a 9to1 engine or an all out Fire Breather you too can benefit from this upgrade! What does this mean to my program your asking, put simply this setup allows you access to the engine performance your builder gave you. You have always had it under the hood you just have never had accessed to it until Now!
These systems were using are used (10 hours or less of run time ) MSDŽIgnition systems from a major racing series. Once we have them in house they are gone through and each ignition box is performance matched with the correct ignition coil for the best track results. The typical turnaround time once an order is placed runs 7 to 10 days. The cost to access this for your racing program during the 2011 racing season is $375 which includes shipping. Link: www.techwestracing.com/page18.html


ep33510