48fullenkamp
12-14-2010, 11:36 AM
I have a 377 with about 11-15 nights on it in two years. Built by Paul Lawson(Lawson Racing Engines) GOT GRAY?
Rotating assembly is balanced, it is .030 over with .125 dome Speedpro Pistons, Cast Eagle Crank, Forged I-Beam 5.7 Rods with a JR motor sports #8 cam. It is 13:1 with my 64cc double hump heads on. It has a bowtie marine intake on it. Motor is in my hobby stock that i ran part time. I figured someone else could us this motor since i dont race this car that much. Every thing in this motor was bought new except for the cam. Motor was never turned over 6200RPM. It will turn alot higher. I do have build sheet to this motor(Paul does). Heads had valve job and springs installed, they had about 5 nights on them before they were put on this motor. Motor is still in the car so you can hear it run. You can also call Paul for referance. 319-470-1055.
$1000 for short block.
$1500 for complete.
Chuck 319-669-9128.
Rotating assembly is balanced, it is .030 over with .125 dome Speedpro Pistons, Cast Eagle Crank, Forged I-Beam 5.7 Rods with a JR motor sports #8 cam. It is 13:1 with my 64cc double hump heads on. It has a bowtie marine intake on it. Motor is in my hobby stock that i ran part time. I figured someone else could us this motor since i dont race this car that much. Every thing in this motor was bought new except for the cam. Motor was never turned over 6200RPM. It will turn alot higher. I do have build sheet to this motor(Paul does). Heads had valve job and springs installed, they had about 5 nights on them before they were put on this motor. Motor is still in the car so you can hear it run. You can also call Paul for referance. 319-470-1055.
$1000 for short block.
$1500 for complete.
Chuck 319-669-9128.