99Fresh
01-05-2011, 12:31 PM
IMCA Small Block Chevy Spec motor
Completely fresh!
Re-blocked with steel splayed caps, line bored, line honed, Zero deck, 4.040 bore, race prepped for dry sump, mains grooved, oil feed front and rear, ARP main studs. Torque plate honed, deck plugged.
3.50 Scat 4340 crank, Scat 6.125 4340 “H” Beam rods, SRP 4.040 pistons, 1/16, 1/16, 3/16 low tension rings. New Clevite rod and main bearings installed. All Felpro gaskets.
IMCA legal spec heads, fresh competition valve job, 2.080 and 1.60 Ferrea valves, Ferrea titanium retainers and Ferrea keepers, New Erson roller valve springs with Comp Cams (T & D) shaft mounted rockers with spring oilers, ARP head bolts, IMCA legal intake, Champ 3 pickup dry sump oil pan, New double row timing set with roller cam stop. New Comp Cams 4/7 swap roller cam. New NGK iridium spark plugs, Power Plus balancer, Cast aluminum rocker covers.
Will supply complete build sheets including cam card. This motor is 3 years old with approximately 30 nights since new. Never been scattered, feature winner!
Price includes 1 dyno day with buyer supplying distributor, plug wires, water pump, belts and pulleys and IMCA spacer.
$8500.00
DOUG CURLESS
563-823-8387
Completely fresh!
Re-blocked with steel splayed caps, line bored, line honed, Zero deck, 4.040 bore, race prepped for dry sump, mains grooved, oil feed front and rear, ARP main studs. Torque plate honed, deck plugged.
3.50 Scat 4340 crank, Scat 6.125 4340 “H” Beam rods, SRP 4.040 pistons, 1/16, 1/16, 3/16 low tension rings. New Clevite rod and main bearings installed. All Felpro gaskets.
IMCA legal spec heads, fresh competition valve job, 2.080 and 1.60 Ferrea valves, Ferrea titanium retainers and Ferrea keepers, New Erson roller valve springs with Comp Cams (T & D) shaft mounted rockers with spring oilers, ARP head bolts, IMCA legal intake, Champ 3 pickup dry sump oil pan, New double row timing set with roller cam stop. New Comp Cams 4/7 swap roller cam. New NGK iridium spark plugs, Power Plus balancer, Cast aluminum rocker covers.
Will supply complete build sheets including cam card. This motor is 3 years old with approximately 30 nights since new. Never been scattered, feature winner!
Price includes 1 dyno day with buyer supplying distributor, plug wires, water pump, belts and pulleys and IMCA spacer.
$8500.00
DOUG CURLESS
563-823-8387