glnrcg
01-05-2011, 11:11 PM
I have 6 Oliver SBC 6.125 rods with 2.100 pins. These are in excellent condition. Been magged. 600 laps since these were new.Was going to buy 2 new ones but decided to go with different stroke since I need new pistons. Asking 300 for the six. Buy 2 new ones and you would have a 1300 dollar set of rods for about 600.00.SOLD
2 sets of Used Crower .842 lifters. 1 straight up and 1 offset lifter in each pair. Excellent condition.
150.00
1 Used Crower roller cam for SB2.2 on standard block. Crower job # E60332. BBC journals. 125.00
1 used Crower sb2.2 cam for standard block. 50mm journal. Crower job # E65645. May be able to be used as core or reground. Lobes haveflaked off and have wear.
50.00
1 Used Comp Cams roller. Was in an 18 degree 410.50mm journals.This profile was in a Pro Power motor. Great accelleration and power.
100.00
glnrcg@netzero.com
2 sets of Used Crower .842 lifters. 1 straight up and 1 offset lifter in each pair. Excellent condition.
150.00
1 Used Crower roller cam for SB2.2 on standard block. Crower job # E60332. BBC journals. 125.00
1 used Crower sb2.2 cam for standard block. 50mm journal. Crower job # E65645. May be able to be used as core or reground. Lobes haveflaked off and have wear.
50.00
1 Used Comp Cams roller. Was in an 18 degree 410.50mm journals.This profile was in a Pro Power motor. Great accelleration and power.
100.00
glnrcg@netzero.com