dirtnut10m
01-08-2011, 07:35 PM
also have a very nice round tube 4 bar warrior roller will sale rolling or turnkey roller has brand new red body with red decking has winters mag center rearend threaded body shocks with outerwear covers all around atl fuel cell braided fuel line and log front to back liftbar with 5th and 6th coils motor plate used set of spreadport headers interior has ovalcraft 17" aluminum seat , belts , new triangle net ,full gauge package with oil temp,oilpressure,water temp, fuel pressure with all lines, ttach with recall, right front shut off, battery disconnect , belts, drilled rotors and warrior calipers on all corners and more will take 4500.00 rolling or for 8000.00 turnkey with brinn trans, bellhousing, new starter , driveshaft , dynatech headers, radiator, all power steering including sweet rack with built in servo 358 c.i engine in ad solid cam one or can assemble with any of items including nice street stock other motors and parts for right trade let me know thanks
Above Added: Sat January 8, 2011, 2:42 pm EST
here is a nice and fresh limited late model motor fresh ready to go from intake to pan has a 350 chevy 4 bolt main punched .40 with speed-pro forged pistons eagle 5.7 h-beam rods , chevy steel crank has a crower solid cam and lifters number 00351 has chevrolet 461 double hump heads set up for .600 lift cam stainless valves roller rocker arms and stud girdle arp studs all around head studs rocker and such has aluminum water pump ,all pulleys ,mecanical fuel pump , victor jr intake, msd dist 8561,canton 8 quart oil pan , moroso tall valve covers with dual stacks on one side only thing motor needs is carb to be race ready even comes with new motor mounts motor is fresh never run and comes with all wires and such complete from intake to pan drop in add card adjust valves and race makes about 44-450 horespower asking 2400.00 for this one or second one is 358 c,i roller engine unassembled 350 4 bolt main block, light weight crower crank pro action cylinder heads ported bowl blended arp 7/16th studs over 2000 in these heads when built set up for .725 lift roller cam comes with new melling high volume oil pump rod and pick-up tube 7 quart double kickout pan victor jr intake-2975 eldebrock high aluminum circle track covers erson solid billett roller cam .630-.645 lift , crane roller lifters crower 1.55-1.65 roller rockers stainless stud girdle new with poly locks high volume fuel pump new fuel pump push rod pretty much everything to build motor except rods and pistons asking 1700.00 for this engine also have msd 6t boxes with msd soft touch rev controls 100.00 each set kirkey 17" lightweight seat 100.00 brand new long sbc aluminum water pump with pulleys 75.00 brand new 7 quart double kick oil pan and pickup 75.00 sbc dirt late model spreadport headers used set 75.00 new set 125.00 big lot of braided line and fittings lines from 12 an to 3an fittings aplenty asking 150.00 for whole lot 32 gallon square fuel cells one for parts can dented good bladder 25.00 second one ready to bolt in asking 75.00 oval craft 17" aluminum seat with black cloth cover 50.00 willing to trade any of these parts or all on nice enclosed trailer for my dirt late model or super nice open trailer with box , tire rack and cash also have complete set of 15x14x3" aluminum wide five rims 2 beadlock and 2-non asking 150.00 for all 4 weld brand any questions email dirtnut10m@aol.com or call 757-374-3159 before 9.p.m eastern time thanks also carb pictured not for sale and motor is mock assembled thanks
Above Added: Sat January 8, 2011, 2:42 pm EST
here is a nice and fresh limited late model motor fresh ready to go from intake to pan has a 350 chevy 4 bolt main punched .40 with speed-pro forged pistons eagle 5.7 h-beam rods , chevy steel crank has a crower solid cam and lifters number 00351 has chevrolet 461 double hump heads set up for .600 lift cam stainless valves roller rocker arms and stud girdle arp studs all around head studs rocker and such has aluminum water pump ,all pulleys ,mecanical fuel pump , victor jr intake, msd dist 8561,canton 8 quart oil pan , moroso tall valve covers with dual stacks on one side only thing motor needs is carb to be race ready even comes with new motor mounts motor is fresh never run and comes with all wires and such complete from intake to pan drop in add card adjust valves and race makes about 44-450 horespower asking 2400.00 for this one or second one is 358 c,i roller engine unassembled 350 4 bolt main block, light weight crower crank pro action cylinder heads ported bowl blended arp 7/16th studs over 2000 in these heads when built set up for .725 lift roller cam comes with new melling high volume oil pump rod and pick-up tube 7 quart double kickout pan victor jr intake-2975 eldebrock high aluminum circle track covers erson solid billett roller cam .630-.645 lift , crane roller lifters crower 1.55-1.65 roller rockers stainless stud girdle new with poly locks high volume fuel pump new fuel pump push rod pretty much everything to build motor except rods and pistons asking 1700.00 for this engine also have msd 6t boxes with msd soft touch rev controls 100.00 each set kirkey 17" lightweight seat 100.00 brand new long sbc aluminum water pump with pulleys 75.00 brand new 7 quart double kick oil pan and pickup 75.00 sbc dirt late model spreadport headers used set 75.00 new set 125.00 big lot of braided line and fittings lines from 12 an to 3an fittings aplenty asking 150.00 for whole lot 32 gallon square fuel cells one for parts can dented good bladder 25.00 second one ready to bolt in asking 75.00 oval craft 17" aluminum seat with black cloth cover 50.00 willing to trade any of these parts or all on nice enclosed trailer for my dirt late model or super nice open trailer with box , tire rack and cash also have complete set of 15x14x3" aluminum wide five rims 2 beadlock and 2-non asking 150.00 for all 4 weld brand any questions email dirtnut10m@aol.com or call 757-374-3159 before 9.p.m eastern time thanks also carb pictured not for sale and motor is mock assembled thanks