View Full Version : thunder bird a arm
dieselheadracing
01-16-2011, 01:35 PM
i am looking for a late 80s to early 90s thunder bird RF a arm that will bolt to a mustang i think it should be 14 inches from center of the bushing to center of the ball joint
Dirtman29
01-16-2011, 10:45 PM
I know 87 & 88 Tbirds will bolt right on, look for those. Or cut the mustang one between the spring cup & ball joint and make it whatever length you want it with some flat steel, weld it up good & go!
race21j
01-17-2011, 04:14 PM
I know 87 & 88 Tbirds will bolt right on, look for those. Or cut the mustang one between the spring cup & ball joint and make it whatever length you want it with some flat steel, weld it up good & go!
That is the way we did it.makes it easy to try different lengths.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.