View Full Version : Swingarm car to 3 link
swingarmmod
01-23-2011, 12:17 PM
Thinking of changing my car to a 3 link from a swingarm car for IMCA Sport Mod. Has anyone done this and what are the pitfalls. I understand the bottom arms must be at least 16"s long. What would the angles be on the trailing arms? If anyone has any picts of their 3 link setup I would appreciate it. Just checking out to see if converting is worth doing or move to the A Mods.
cavemod
01-23-2011, 01:35 PM
the rules say no jbars only a rear mounted panhard bar is allowed along with a solid pullbar, as far as bar angles go this is a major tuning tool start out flat on the right and 5* upward on the left and tune from there . Another thing springs must be mounted to the center line of the axle tube no sliders or coilover kits.I went the other way with my deal started out with a 3link and changed to a swingarm.
car4cyl
01-24-2011, 06:14 PM
Send me your E-mail and i will send you some pics of a IMCA sport mod 3 link, jandlpaulson@aol.com
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.