Moldymulldoon
01-25-2011, 02:14 PM
Hey. Rules state a 17 pound minimum on flywheel. I have a vega flywheel which is close to the minimum weight. I plan on machining down the outer step [ .185 ] and having it ground enough to clean up the hot spots.
I also use a 9 inch clutch plate. old style 6 cylinder pressure plate.
3300# car 358 2bbl .450 lift cam rule. maybe 375 HP on a good night perfect air.. ect ect ect. 6:00 final beginning of season... 6:20-6:33's later on. 3 speed saginaw- 2 speed for specials and 'big money nights.
My question is;
What out there, is the lightest stock pressure plate [ stock ] produced?
Kids at the parts house cannot find parts needed, as they need to know if it has AC and power brakes. Parts books and cross referencing seems to have gone the way of the dinosaur.
I appreciate the read and thank-you for the help.
Moldy
old beater hobby car.
I also use a 9 inch clutch plate. old style 6 cylinder pressure plate.
3300# car 358 2bbl .450 lift cam rule. maybe 375 HP on a good night perfect air.. ect ect ect. 6:00 final beginning of season... 6:20-6:33's later on. 3 speed saginaw- 2 speed for specials and 'big money nights.
My question is;
What out there, is the lightest stock pressure plate [ stock ] produced?
Kids at the parts house cannot find parts needed, as they need to know if it has AC and power brakes. Parts books and cross referencing seems to have gone the way of the dinosaur.
I appreciate the read and thank-you for the help.
Moldy
old beater hobby car.