PDA

View Full Version : disk brake on rear of 7.5 gm



fattboyee
02-07-2011, 01:46 PM
i have been looking and the easiest thing i see to use for the roters is off of a 1998 4x4 blazer .

what have yall used?
i would order the kit but i have alot of metric calipers and even some weld on brackets.
thanks
butch

archie142
02-17-2011, 07:31 PM
Jeep cherokee front rotors. Have to open lug holes but work great. jeep 5x4.5 metric 5x4.75

dirttrackrocker
02-21-2011, 03:12 PM
S-10 blazer or truck 4x4 is the easiest and cheapest way to go. You may have to do just a little minor grinding on the outside edge of the axle flange. Most of the weld on brackets are too tall also, so you'll have to trim the bottom off.

21 racer
02-21-2011, 09:04 PM
late model s-10 or s-10 blazer disc brake rear end take off the parts put on your rear end