View Full Version : valve cover issue
jfleming
02-19-2011, 06:52 PM
Valve Covers 18 degree wide body
Does anyone have a suggestion on a good set of valve covers that are the wide body or sometimes referred to as the inverted flange for a stand chevy bolt pattern. I am looking for something that will clear the jesel rocker system on a 18 degree head. Need extra room
thanks
BigBlueFord
02-20-2011, 06:24 AM
Here's a link to Dart's cast aluminum inverted flange valve covers:
http://www.dartheads.com/products/accessories/valve-covers/dart-small-block-chevy-cast-aluminum-valve-cover-set.html
joedoozer
02-20-2011, 07:29 AM
Here are some fabricated ones.
http://www.speedwaymotors.com/S-B-Chevy-Fabricated-Valve-Covers-w-Breather-Tubes,9005.html
jfleming
02-20-2011, 08:04 AM
thanks for the reply, I like the dart ones but they dont have the breather tubes, Have you used the fabricated one? if so how is the quality
thanks
BigBlueFord
02-20-2011, 11:58 AM
thanks for the reply, I like the dart ones but they dont have the breather tubes, Have you used the fabricated one? if so how is the quality
We added breather tubes to the Dart valve covers (tubes bought from speedway motors)....We tried the fabricated ones, they were okay for a while but eventually the flange distorted and they start leaking. The Dart valve covers are lot more substantially and less likely to deformed.
jfleming
02-20-2011, 01:28 PM
where you just able to weld in the tubes from speedway?
BigBlueFord
02-21-2011, 06:29 AM
Valve cover and tubes are both aluminum.....so just TIG weld them. Use a hole saw to drill hole halfway between mounting bolts.
BigBlueFord
02-22-2011, 06:47 AM
Here's a couple valve cover pictures:
42915
42916
jfleming
02-26-2011, 08:24 AM
where did you get that weld in bung for the oil fill?
thanks
BigBlueFord
02-27-2011, 05:53 AM
I got the breather and the oil fill bung from Speedway:
Here's a couple of links:
Oil Fill Cap:
http://www.speedwaymotors.com/Weld-or-Bolt-On-Fill-Cap,1608.html
Weld-on Valve Cover Breather:
http://www.speedwaymotors.com/Weld-In-Valve-Cover-Breather-Sets,1879.html
Speedway has both aluminum and steel breather kits, make sure you order the aluminum version.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.