Cam Stuff yet again

[steveshawjr]

hello guys im looking to by a good solid cam

i got a line on one right now

Adv Dr int. 288 exh 288
dur@.50 int 224 exh 224
lift int .479 exh .479

106. lobe sep



anythought to this what it would make rpm wise i lost my old dyno program along time ago just to see some numbers on

[Milford Motorsports]

If there are not any rule restrictions,I would be looking more in the .500+ lift cams.You are looking at a 5000 - 7000 rpm cam now.You will have lots of low end power,but will run short at the top end.

[steveshawjr]

yeh have a lift rule cam just falls into valve lift rulle with clearances