PDA

View Full Version : 2006 Shaw chassis and tons of parts



sweet71
04-10-2011, 08:13 PM
2006 Larry Shaw Modified chassis with new bumpers, nerf and body uprights. Fresh paint. Flat black interior installed.

Also installed on chassis are the following:
Shaw motor plate
Brake lines
Howe master cylinders and pedals
New Birky roller gas pedal
MSD 6AL ignition box and Blaster 2 coil
Quick disconnect steering hub and wheel with complete steering shaft
GM 605 steering box
Afco steering quickner
16” Kirkey intermediate seat with right side head rest and red cover
Shifter levers and linkage
New Wilwood brake bias adjuster
Power steering reservoir and hoses
Battery box
Master disconnect switch and cables to battery
New 22 gallon JAZ fuel cell with inline filter and lines to fuel pump

Other stuff that will go with the chassis includes the following:
Steel driveshaft with long yoke that fits Shaw with Brinn transmission
3 new black Aero wheels 2 – 2” offset and 1 – 3” offset non beadlock
2 used black wheels, one beadlock Aero and one non beadlock basset
Shaw j-bar with standard frame slider
Shaw biscuit pull bar with red and blue biscuits
10-12 springs, various rear springs and some pull bar springs
Southwest Speed screw in ball joint collars and various rods and ends for upper c/a’s
Set of Shaw upper control arms
Two older quickchange centers with shafts, no bells, steel ring gear carrier with gear
Two sets of 23 degree headers for Shaw modified
Couple of shocks, fan spacers and other misc. parts

Everything else has been sold, this is all we have left.
This would make a great B-mod or even A-mod.
We are selling everything associated with the race car. Bring your trailer and take it all. $4,000. located in Jacksonville, Fl. Contact sweetmotorsports@clearwire.net or call 904-662-6063.

May also trade for Kart racing operation or 16-18 foot enclosed trailer with a/c for Kart racing