PDA

View Full Version : loose entry



jbh25
04-17-2011, 08:52 PM
car is loose on entry off the throttle, feels like the rr is just sliding on top of track.
car is leaf spring.
whats the best way to load the rr more on entry so it will tighten up gettin in and still come off good

gadirtracer
04-17-2011, 10:41 PM
Move RR tire/wheel In
Lower RR air psi
Move ballast/fuel cell up and/or to the right
Stiffen RR spring, may loosen exit
Run less LR bite
Taller lowering blocks
Less compression in RR shock to quicken weight transfer

racerkrp1
04-18-2011, 09:45 AM
Also stiffen LF or weaken RF

Graff Spee
04-19-2011, 08:40 PM
Pull in rt. rear wheel or move out lft. rear wheel. Soften rt. rear spring. Check your shock travel indicaters. You don't want more than 4 inches of wheel travel on rt. rear. If you have more than that you are most likley to soft on rt. rear spring. Yopu can also move rt. front wheel out to tighten on entry.

Dirtrunner35
04-23-2011, 07:42 PM
Don't let up on the gas so much, or turn up the idle.