nice crack

[ask0329]

pulled out the block that came with the car and started checking it over for the first time. When i got the car I just stored it into the corner of the garage as i didnt plan on using it right away. Got it out today to starting going through for a rebuild and found this. yay! Probably will end up in the scrap pile.

http://i64.photobucket.com/albums/h169/afi0329/8b4e1d8a.jpg

[runyou-2]

Dang son,should of pulled the block drains last fall huh?

[usafracer]

What did the piston look like?

[Kwaz-13]

Looks like it's too close to the bottom to sleeve. That'll ruin your day for sure!

[ask0329]

When I got the block/engine the previous owner already had the bottom end out of it but the heads where on it. Now I know why. There was no water in it. I didnt plan on running it so I really didnt care about the condition and didnt look at it too much. I was more concerned with the car itself. It does suck though. As for the pistons, I'll take a pic of them this evening and post so we all can have a good laugh. I still made out on the deal as I traded a 4cyl ministock, a spare block and some parts for a complete roller imca and all the engine parts. Car ran really well with our homebuilt engine. Just getting ready to build a back up engine and came across this. No worries though as 350 blocks are easy enough to come by on craigslist.

[ask0329]

piston #1
http://i64.photobucket.com/albums/h169/afi0329/514fb532.jpg
piston #2
http://i64.photobucket.com/albums/h169/afi0329/e0b9e64a.jpg