View Full Version : RF shock travel
JDracing57
05-10-2011, 12:49 PM
When sitting at ride height how much compression/inward travel should the RF shock have?
thanks
racin6mod
05-10-2011, 06:26 PM
centered would be good 3 1/2 inches. some builders are now putting the rf top shock mount up higher in the chassis to allow for more compression travel .
1cln_sdime
05-10-2011, 07:49 PM
most are doing that, just set the ride height at builders specs and u should be good or r u building a chassis, if so i would run it to where if would bottom out right bf the frame digs
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.