how to mount upper a-frames

[wyattbryant#0]

need some help on how to mount upper a-frames without a jig.

[raceman17]

You need a caster/camber gauge and you need to know where your syspension is going to sit at ride height. Look at another chassis and see about there they are located and then tack weld them in place. Check your caster and camber and camber gain. Repeat process until you are satisfied.

[CHRISTINE]

How much caster/camber gain do you want on lf and rf? What about anti dive?

[wyattbryant#0]

about 3 degrees rf, and about 1.5 to 2 degrees lf

[Graff Spee]

Level the upper mounting points with the lower c/arm points. You do not want any type of anti-dive!!!