Block, rotating assembly, heads

[chadperf122]

GM Bowtie 1184 block, fresh 4.125" bore. Has been partially lightened, crack checked, cleaned, and new coated DuraBond cam bearings.

-3.480" Crower semi-lightweight crank, new 6.125" Compstar rods, new Mahle Pro Series pistons (.043/.043/3mm rings, gas ported, 12.5cc dome), Mahle rings and Clevite H bearings. New balance, crank has 275 laps on it.

both the block and rotating assembly with new timing set and CamMotion roller cam asking 4500.00 or offers.

-AFR 235/70cc Comp CNC ported heads (upgraded Titanium retainers), Jesel 1.6/1.5 shaft rockers, and AFR Titan composite intake. This top end is brand new will sell all for 3500.00 or offers.

PACKAGE DEAL COMPLETE ENGINE FOR 7500.00 (will need final assembly)

-cast iron Dart 230cc/-64cc heads. Heads are unported. Angle milled, titanium retainers and locks. Jesel 1.65/1.55 shaft rockers(missing 1 set), Super Victor intake, and aluminum valve covers. Heads have 275 laps on them. Came on a motor I purchased. 1000.00 or offers

-cast iron RHS 220cc/48cc heads. Ferrea valves, titanium retainers and Isky 8005sp springs. 6 nights on valve job and resurface. Heads are unported. 600.00 offers

cast iron EQ 220cc/48cc heads. Very nice port job, comes with port matched, ported Super Victor intake and 1.52 CompCams steel stud mount rockers. Brand new Manley valves, titanium retainers, and Isky 8005sp springs. 1500.00 or offers

Justin Chaddock
585-703-5414
chadperf122@yahoo.com

[chadperf122]

Any interest? Trades/offers? More parts to come clearing out shop.....

[powerslide]

PM me a price on the block if you want to sell alone. Is it setup for wetsump? standard rails? sleeves? honed after the 4.125 bore? 400 mains?

[chadperf122]

PM sent....

[smokey 4 president]

Rhs cast iron heads, are valves titanium, what size are valves,

[chadperf122]

RHS heads have stainless 2.02" x 1.600" valves. Were new 6 nights of racing ago approx 175 laps. Springs were also new at that time.

Justin

[chadperf122]

- 1 set used Oliver 6.0" x 2.0" rods. Low laps changed combo. 500.00

- 1 set used Childs & Albert 5.7" x 2.100" rods. These are bolt and nut style. 150.00

- New Dart Little M block. 4.125" bore, 350 mains. Still as it came out of the box. 1500.00 offers

Justin

[chadperf122]

Call, text, or Email me....I'm ready to deal......