snp00z
06-09-2011, 05:04 PM
Dart SBC Aluminum block, fresh 4.135" bore, 350 mains, tall deck with 14 degree head studs. Pro Action/ RHS 14 degree fully CNC ported heads, berylium intake seats, uses 2.250"/1.6 valves.Heads have intake flow numbers of 401 cfm @ 750 lift & 274 cfm exhaust @ 750 with a mid 40cc chambers. Have the titanium valves, Manley ICD titanium retainers & Pacalloy springs that came out of heads. Manifold was fully ported by Ron's Porting, also included is the valley cover & phenolic spacer plates. In addition: T&D shaft rockers. Oliver billet rods. Comp Cams belt drive system. Comp billet roller cam. There is an almost new set of JE pistons for a 4.145" bore. These parts have low run time and have been sitting in my garage....it's time to sell!! Bring your truck, $5,500 cash and it's all yours!
Note: I do not have a crankshaft to go with these parts.
Call Steve at 636-677-1320 days or 314-374-5660 cell.
Note: I do not have a crankshaft to go with these parts.
Call Steve at 636-677-1320 days or 314-374-5660 cell.