PDA

View Full Version : 2-link rear steer



tisdis83
06-12-2011, 05:20 PM
I have a 2 link solid bar for pull bar. I am wondering if anyone has any answers on how to get rear steer out of it. I have seen it done, i race with a guy whos car reacts like a 4-bar car. Thanks for any suggestions

stpmotorsports
06-13-2011, 09:54 PM
short rear trailing arms, we ran 7" tubes. rr level to uphill 5 degrees, lr 15 to 22 degrees uphill. We also liked the short panhard bar (12" center to center) on left side of pinion to left side of chassis, with I believe 4" inches of rake. 125# 16" spring on 6-3 afco coilover on lr, 200# spring on top on rr with shock in front. YOu can put the rr spring on slider behind the rearend and make it carry the lf. Its been a couple years, but we ran very competitively with the 4 bar cars and never had to adjust anything.