PDA

View Full Version : Pro comp 2 ultra light memory auto meter tach help



lyons17r
06-17-2011, 04:14 PM
I'm needing to kno how to hook up my tach I have a white,green,black,and red wire coming out of the back of it, I am hooking it up to a msd 6al, I think I seen somewhere that the green one goes to my tach input on my msd but idk what the rest of them go.. Thanks

mqdirtracer57
06-17-2011, 04:38 PM
white = illumination
black = ground
red = switched power
green = tach input

lyons17r
06-17-2011, 04:45 PM
So white and red can basically go together, and thanks

merc123
06-19-2011, 08:12 AM
So white and red can basically go together, and thanks

If it's a memory tach and you hook the red to the switched power when you cut the switch off it will not hold the memory. You can hook up the red to a solid power source like the hot side of the solenoid and the white to the switch for the lights.

fast_crew
06-19-2011, 09:31 AM
If it's a memory tach and you hook the red to the switched power when you cut the switch off it will not hold the memory. You can hook up the red to a solid power source like the hot side of the solenoid and the white to the switch for the lights.


An Auto Meter tach should hold it's memory even with switch power shut off, we can recheck ours hours after the race and it's still saved.