PDA

View Full Version : Pullbar setup on ump hoosiers



racer21
06-19-2011, 08:32 AM
Hey guys i was wanting to know what pullbar setup to run with the ump tires,the track i run has no tire rule and most guys are on the ump tire and im on the arg60.Guess im going to have to make the switch and was wondering if the pullbar springs or bushings would be the same,thanks in advance

racin6mod
06-19-2011, 06:36 PM
what are you running now?

racer21
06-19-2011, 08:13 PM
Afco big biscuit blue and red,

racin6mod
06-20-2011, 05:41 PM
thats pretty much what I have. I use the afco biscuits and make my own pullbar.my brothers car has a afco spring type with a prog. up to 1100#.

racer21
06-20-2011, 07:53 PM
Thanks racin6 for the info,are you on the hoosier d40 or the a's if you dont mind me asking what kind of air pressures you running?

racin6mod
06-21-2011, 06:00 PM
we run both a's and d'a lf 9psi lr 6 to 8 psi rf 14 psi and rr 10 to 12 psi as the track dries out I lower the psi in the rear tire as well as the rf / beadlock on slick tracks