2004 grt

[2rs]

what kind of up dates can you do to this chassis to make it the best it can be, i also have ohlins shocks one set of 4 for intermentent track and a set of 4 for dry slick , and a set of 4 pro shocks with gas built by shy and also a set of afco gas built by evny, so i guess the question is what do i need to make the car work its best with a spec 55 tire and dry slick and what spindles should it have on it and what lenght a arm on it , i just need some good help thanks for reading this.

[GRTLRBITE]

09 spindels with 19 1/4 rf lower. what syle 4 bar holes do you have on it now

[2rs]

it has the ones that came from grt theres alot of them up top and like 6 or so on the bottom, drivers bottom has the bolt on for shorter bar.

[2rs]

09 spindels with 19 1/4 rf lower. what syle 4 bar holes do you have on it now

ok the car has the following on it, rf upper is 8" the lower is 171/4" the spindle is10" the left side is upper 10" lower is16 1/2" and the spindle is 11" and black the rack is a sweet double adj on the ends, the 4 bar holes has 9 at top and bottom has 7 chassis no#is 2431 thanks for any help.

[GRTLRBITE]

we went to the shorter grt spndels too , they make car steer so much better. left side bars but upper at 7 up and bottom 3rd up. right side 2 or 3rd up lower and upper right 5 hole up

[2rs]

we went to the shorter grt spndels too , they make car steer so much better. left side bars but upper at 7 up and bottom 3rd up. right side 2 or 3rd up lower and upper right 5 hole up

So is the rest of the front end right other then the 09 spindles and right lower control arm.

[GRTLRBITE]

all mounts are 2006 mounting points. just right and left 09 spindel and 19 1/4 right lower with i think 8 1/4 upper

[SteveHansen06]

we went to the shorter grt spndels too , they make car steer so much better. left side bars but upper at 7 up and bottom 3rd up. right side 2 or 3rd up lower and upper right 5 hole up

What height of spindles would that be roughly? I have an 05 GRT and trying to see if some of the parts I have are correct or if I need to invest in other parts to make it right.

Thanks

[2rs]

all mounts are 2006 mounting points. just right and left 09 spindel and 19 1/4 right lower with i think 8 1/4 upper

Thank you very much for your help!!!!!!!!!