PDA

View Full Version : Tight in the center corner



racinjason29
07-25-2011, 05:55 PM
I run a 116" wheebase caprice with LR 225 RR250 LF1000 RF1300 have 50/50 valve stock pro shocks on the rear, easy up 7/3 valve carerra on RF and 50/50 carrera on the left front. I have a 50 ballast on the left rear and usually run 15 gallons of fuel.

The car dives into the corner well and then it just wants to go straight.

the track is a small 1/4 to 3/8 banked track

any advice is appreciated

stock car driver
07-25-2011, 06:03 PM
How much stagger?

My car is tight in the middle and wont rotate, if I am ever under 1.5 inches... period.

stockcar5
07-25-2011, 10:30 PM
more stagger and less lr bite will both help.

SCREAMIN1CAR
07-26-2011, 09:05 PM
I run a 116" wheebase caprice with LR 225 RR250 LF1000 RF1300 have 50/50 valve stock pro shocks on the rear, easy up 7/3 valve carerra on RF and 50/50 carrera on the left front. I have a 50 ballast on the left rear and usually run 15 gallons of fuel.

The car dives into the corner well and then it just wants to go straight.

the track is a small 1/4 to 3/8 banked track

any advice is appreciated

swap sides with ur rear springs,and when i ran an impala at richmond i used a 1450 rf and an 1150 lf spring.

bushracing67
07-26-2011, 10:38 PM
that easy up shock on the rf prolly aint the best thing going, i would try a 6/6 and try moving your ballast if you do not have weight jacks