racer33d
08-04-2011, 05:00 PM
Late model rollers
2003 Square tube Mastersbuilt Roller, tiger rear-end 486, 32 gal cell, wilwood star light hubs, low friction bearings, BRT 4.3 rack, .810 scalloped rotors and wilwood calipers, $6000
2002 Barry Wright roller, updated in 09, winters rear-end 486, 32 gallon tear drop cell, wilwood starlight hubs, 1 1/4 scalloped rotors, sweet 4.3 rack new in 2010, $6500
Carburators
K-B 390 -$400
Stealth 830- $750
Rearends
Tiger 5.83 complete, tiger 6.33 complete, tiger center section, non- quick change, brand new 6.50 gear with spool, $2500 for all, will split.
Shocks
1 set AFCO M2 gas double adjustable canister shocks - $1000 for set
Engines
IMCA late model Dodge spec engine, less than 100 laps since fresh, dodge R3 block, 40125 bore, 3.235 stroke, new springs, valves, retainers, etc,can include new bert bell housing, and shoenfeld headers. Engine complete with distributor, fuel pump, pulleys, harmonic balancer, and IMCA carb spacer, $7500
IMCA late model chevy engine, 4.040 bore, new heads, springs, lifters, retainers, rings, bearings, pistons, T&D roller rockers, STILL AT ENGINE BUILDERS! FRESH FRESH FRESH!!! $7500
SB2 open engine, 40155 bore, new JE pistons, new titanium valves, isky tool room srpings, new cam, crank, rods, etc, over $8000 just in new parts in this engine, less than 200 laps since fresh, $13000 OBO
Bryant Crank, 43lbs, 3.335 stroke, great condition- $900 OBO
Transmissions
Bert ball spline, magnesium - $1200
Brinn, needs rebuilt, $900 re-built, or $500 as is
Sump pump systems
Complete wolfe 5 stage dry sump, all lines and tank - $1700
Complete Peterson 5 stage dry sump, all lines and tank - $1500
Wheels
All are 14" wide 5, 5" offset....
16- weld, non-beadlock- $100 each
10- weld beadlock- $175ea
7-real non-beadlock- $100ea
3-real beadlock- $175ea
1- goudy non-beadlock 4 1/2" offset- $100
1-goudy beadlock- $100
Steel 10" wide 5 Bassets
2- bead lock- $50ea
5-non-beadlock- $30ea
Miscellanious items for sale
Onan generator, approx 3500 watts, has sat for almost 8 years, ran when put away, $300 obo
Miller stick welder with generator on mobil cart, also sat for nearly 8 years, ran and worked fine when parked, has several feet of welding lines, $850 obo
2005 Simon model 2032 Scisors lift, working height 26ft, platform height 20ft, 32" wide, 3ft extending platform, works very very well, $3500 obo
For more info, or reasonable offers on any item, CALL Hal at 563-210-3640
2003 Square tube Mastersbuilt Roller, tiger rear-end 486, 32 gal cell, wilwood star light hubs, low friction bearings, BRT 4.3 rack, .810 scalloped rotors and wilwood calipers, $6000
2002 Barry Wright roller, updated in 09, winters rear-end 486, 32 gallon tear drop cell, wilwood starlight hubs, 1 1/4 scalloped rotors, sweet 4.3 rack new in 2010, $6500
Carburators
K-B 390 -$400
Stealth 830- $750
Rearends
Tiger 5.83 complete, tiger 6.33 complete, tiger center section, non- quick change, brand new 6.50 gear with spool, $2500 for all, will split.
Shocks
1 set AFCO M2 gas double adjustable canister shocks - $1000 for set
Engines
IMCA late model Dodge spec engine, less than 100 laps since fresh, dodge R3 block, 40125 bore, 3.235 stroke, new springs, valves, retainers, etc,can include new bert bell housing, and shoenfeld headers. Engine complete with distributor, fuel pump, pulleys, harmonic balancer, and IMCA carb spacer, $7500
IMCA late model chevy engine, 4.040 bore, new heads, springs, lifters, retainers, rings, bearings, pistons, T&D roller rockers, STILL AT ENGINE BUILDERS! FRESH FRESH FRESH!!! $7500
SB2 open engine, 40155 bore, new JE pistons, new titanium valves, isky tool room srpings, new cam, crank, rods, etc, over $8000 just in new parts in this engine, less than 200 laps since fresh, $13000 OBO
Bryant Crank, 43lbs, 3.335 stroke, great condition- $900 OBO
Transmissions
Bert ball spline, magnesium - $1200
Brinn, needs rebuilt, $900 re-built, or $500 as is
Sump pump systems
Complete wolfe 5 stage dry sump, all lines and tank - $1700
Complete Peterson 5 stage dry sump, all lines and tank - $1500
Wheels
All are 14" wide 5, 5" offset....
16- weld, non-beadlock- $100 each
10- weld beadlock- $175ea
7-real non-beadlock- $100ea
3-real beadlock- $175ea
1- goudy non-beadlock 4 1/2" offset- $100
1-goudy beadlock- $100
Steel 10" wide 5 Bassets
2- bead lock- $50ea
5-non-beadlock- $30ea
Miscellanious items for sale
Onan generator, approx 3500 watts, has sat for almost 8 years, ran when put away, $300 obo
Miller stick welder with generator on mobil cart, also sat for nearly 8 years, ran and worked fine when parked, has several feet of welding lines, $850 obo
2005 Simon model 2032 Scisors lift, working height 26ft, platform height 20ft, 32" wide, 3ft extending platform, works very very well, $3500 obo
For more info, or reasonable offers on any item, CALL Hal at 563-210-3640