dirtnut10m
08-07-2011, 02:59 PM
:cool:here are two dirt late models for sale or trade first is a 04 with 08 updated bernstein lazer out of pa comes with purple chassis in straight shape has decking (not a nice word)(not a nice word)(not a nice word)(not a nice word)pit old body for ?? 2 spindals 2 lowers 2 uppers 2 32 gallon fuel cells 1 with cage 1 appelton rebuilt intergrated built in servo 18 1/4 3.4 with required new lazer 1/4 spacer gauges fuel pressure oil pressure and water temp installed shape ?? never used lift bar with 6th coil steering column and wheel 2 hubs with bearings seals and locks 2 rotors curved vanes shifter belts net spreadport headers dynatechs 4 outlaw calipers 2 left 2 right has all calipers and pedals including fuel brake bias gauges right front shutoff brake bias mini knod hard wired into brake lines all brake lines run have stainless lines for front new rotor bolts and such 2 weld non locks 15x14x5 backspacing with hoosier d-21s enough parts to put front end rolling minus tierods and strut bars. next is 2006 dirt teck 4 bar car uses rocket rear end wide masterbuilt front has atl 26 gallon cell with all lines and log fuel shut off c&s winters low drag rear end with rocket bearing birdcages swivel shock ends on three rear corners fuel cell and rearend vents and top mounted rear end filler remote mounted batterry charging posts and shut off , lift bar with 5th and 6th coil three afco and 2 carrera shocks and springs threaded bodies front midplate interior is chrome (not a nice word)(not a nice word)(not a nice word)(not a nice word)pit with kirkey kightweight 17" seat with cover right front shutoff woodward collapsible steering shaft ppm shifter 4 gauge package with 11 grand tach belts net outlaw brake calipers on all corners dynatech headers with mufflers aluminum radiator 4 weld rims and tires engine is 377 ci aluminum head turning 622 horsepower off dyno starts with 400 block worked eagle lightweight crank and rods mahle lightweight pistons flat tops pro topline aluminum heads with titanium valves comp cam shaft rockers eldebrock intake 750 carb adams water pump high volume fuel pump has msd 6al box and coil to get the car race ready needs dist power steering pump and pulleys , will leave on to hear car run or if trading with one will leave weights and trans and driveshaft every thing else there willing to trade on ?? or sale make offer on all ty frank 757-374-3159 begin_of_the_skype_highlighting 757-374-3159 end_of_the_skype_highlighting or dirtnut10m@aol.com