View Full Version : Coil question
Norton22
08-17-2011, 08:05 PM
We have been running a stock coil with the TFI Dist. What is a good coil to run Im sure there is something I need to be running other then a stock on
thanks for any help
Milford Motorsports
08-17-2011, 08:32 PM
Most any after market high out put coil will work.MSD Blaster 2 is a good one.
Dirtman29
08-17-2011, 09:46 PM
I use the MSD blaster TFI coil #8227, works great IMO.
longhornracer
08-18-2011, 03:21 AM
Have always ran the Blaster 2 coil...
84Dave
08-18-2011, 12:46 PM
If you use an oil-filled coil, do NOT mount it horizontally. Mount it vertically. If mounted horizontally, the cooling oil can leave about 20-25% of the coil secondary windings uncovered, which can lead to ultimate coil failure. Been there....... done that! -Dave-
drtlvr
08-18-2011, 01:51 PM
We have been running a stock coil with the TFI Dist. What is a good coil to run Im sure there is something I need to be running other then a stock on
thanks for any help
NO power or reliability to be gain going to anything other than a stock coil. JMO
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.