PDA

View Full Version : Wanted All Aluminum 400+ C.I. engine


RACR_73s
09-04-2011, 08:02 PM
Looking for an all aluminum engine for a dirt late model 400+ cubic inches(prefer sbc but will consider others). Midwest location prefered around Illinois. Low budget team looking for a good deal. ~Thanks~
tomuchbite
09-05-2011, 06:18 AM
Racing junk.com. Ad number 2298572

Clement 400 c.i.
warrior14
09-05-2011, 03:47 PM
sent u a pm
grt74
09-05-2011, 05:26 PM
We have an ex pro power engine fresh with 0 laps 415 18 degree made right at 800hp(of coarse every dyno will say a little different but they build alot of nationwide stuff too so it should be real close)just spent 8000 on freshen will take 11000, we have 3 engines and only need 2, pm me or call 931 320 2293 thanks john. FRESHENED BY KMF RACE ENGINES SORRY GUYS A LOCAL GUY SAW THIS AND ITS GONE THANKS
ev36rayburn
09-05-2011, 09:39 PM
We have our 390cornett ford were thinking of selling. Its one of tim lances former motors. We ran it last season and did a total freshen over the winter. Put in couple weeks ago made 4 lapsand had a head issue. Were going to get it fixed but will be selling it complete with headers and bellhousing. Well just keep carb. Jason can give u the full scoop on it. Otherwise tims got one if not two other 390s I think he's selling. Eric Vaughan
ev36rayburn
09-05-2011, 09:50 PM
Forgot to mention well have our rayburn midplate and radiator to go with as well if interested.
bizkit
09-06-2011, 12:39 PM
FRESH 430 All alum

Brodix block (4.135 bore)
GB2300 heads
Crower crank (4.0 stroke)
Crower rods (new)
JE pistons (new)
Isky lifters (new)
Gear drive
CV pulleys
MSD dual dist.
19” GM fan blade
$15,000

Please call Dane @ 901-508-6523 or email
Dane@ohhendricks.com


Call or email for best pricing
barterr1
09-06-2011, 09:32 PM
418 Custom 13 Degree with carb and styles stainless headers


http://www.racingjunk.com/Late-Models/2265386/418-Custom-13-degree-engine.html
ON THE WALL
09-07-2011, 11:31 PM
Built By GCP Engines

* 732 Horsepower
* 652 Torque
* 500 laps since freshen
* Aluminum Rodeck Block
* 18 degree Brodix heads by Weld Tech
* Jessel Shaft Rocker System
* GM Intake
* LA Billet Crank
* Eagle Rods
* Diamond Pistons
* Stewart Water Pump
* ATI Dampner
* MSD Pro Billet Dist.
* Peterson Pulleys 30% reduction
* $8,500

* Barnes 5 stage oil pump
* KSE power steering and fuel pump
* Try-Y Headers
* $10,000

606-923-0981
Text or Call
If not answered leave a message and we will get right back to you