dirtmod30
10-13-2011, 06:54 PM
I had this motor built last winter, block, crank, rods and roller cam was new... dropped a valve after the 12th night of racing...
825 gas carb.. works great with log 400
KSE tandem fuel and power steering pump mounts behind oil pump on bell...300
SCP oil pump.. needs rebuilt 150
Pierce motor plate for Ford 30
Scoenfeld headers for Yates heads.. 100
Brinn bell housing.. magnesium 150
Ford Racing 351 9.2 deck with cleveland mains, bored 30
Eagle 4340 3.750, cleveland mains
Eagle LS 1 6.100 rods
CP pistons.. only 7
Cam Research solid roller cam and lifters..needs 1 set of lifters
T&D shaft rockers.. 1.65 ratio
ARP head and main studs
remote oil filter mount
balancer
Edelbrock water pump
MSD pro billet dist with bronze gear
cirlce track oil pan.. hold 9 qts
Yates heads with matching intake and valley pan...one head needs 2 valves, guides and possibly the valve seats and combustion chamber needs welded Ford racing aluminum valve covers.. powder coated gray with breathers
CV products pulleys
asking 3200 for motor, had 10k in it
motor was really strong.. if someone wants everything will make a package deal for all I have for this...
email dirtmod30@yahoo.com or call 513-575-1585 mon-sat 9-6 ask for Bruce
825 gas carb.. works great with log 400
KSE tandem fuel and power steering pump mounts behind oil pump on bell...300
SCP oil pump.. needs rebuilt 150
Pierce motor plate for Ford 30
Scoenfeld headers for Yates heads.. 100
Brinn bell housing.. magnesium 150
Ford Racing 351 9.2 deck with cleveland mains, bored 30
Eagle 4340 3.750, cleveland mains
Eagle LS 1 6.100 rods
CP pistons.. only 7
Cam Research solid roller cam and lifters..needs 1 set of lifters
T&D shaft rockers.. 1.65 ratio
ARP head and main studs
remote oil filter mount
balancer
Edelbrock water pump
MSD pro billet dist with bronze gear
cirlce track oil pan.. hold 9 qts
Yates heads with matching intake and valley pan...one head needs 2 valves, guides and possibly the valve seats and combustion chamber needs welded Ford racing aluminum valve covers.. powder coated gray with breathers
CV products pulleys
asking 3200 for motor, had 10k in it
motor was really strong.. if someone wants everything will make a package deal for all I have for this...
email dirtmod30@yahoo.com or call 513-575-1585 mon-sat 9-6 ask for Bruce