dirtnut10m
10-15-2011, 01:02 PM
;)here is a 4 race old dirt late model engine complete from air cleaner to oil pan .starts with a 350 block line bored bored decked to 0 stroker clearenced . fitted with a callies compstar 42 pound crank 3.75 stroke ,eagle lightweight h-beam rods, srp lightweight .40 over pistons custom ground solid roller cam and lifters .645-.657 lift true roller timing chain and cover . small 6.25 lightweight balancer . brodix track one heads port matched to a eldebrock 2925 intake crane stud girdle 1.5 roller rocker arms new fabricated valve covers and breathers , msd 85551 dist and 10mm wires new wix oil filter eldebrock aluminum water pump 1/2 inch fan spacer 4 blade fan cv products pulleys cams fuel pump high volume with roller rod cv products 8 quart oikl pan with high volume pump i have the two braided lines which run from the new thermostat riser to back of intake just where niot on in pics . bolt in and go engine needs nothing with only 4 races on it never turned over 7800 rpm and cost over 20k to build sure seal air cleaner more any questions 757-374-3159 or dirtnut10maol.com 4500.00