Kartracer27m
10-30-2011, 09:37 AM
2010 Slack Axiom, Flat black, Std. axle, Ti Rotor, blue brake pads, and Excel gear system. Tie rods, Hiems, King pins, axle, and bearings one race ago. Very very nice go kart! Has select large seat on it. And nice black saraph body.
Engines:
#1 Dual Bearing Flathead built by Ron Chaffin, DX5 cam, AAA carb, Coated header, Very Nice looking engine. Fresh.
#2 Dark Side Racing Engines Dual Bearing. Originally built by Hi Tech and was a house kart engine. 96-3 cam and coated header. Very strong engine! Right now it has 7 races on it.
#3 Is a Dual Bearing engine. All machine work was done by Dover. I can't remember who built it right now though. Has a 07-3 cam. Needs flywheel to be complete.
Dual disk bully clutch has 7 races on it since new. Comes with 12, 13, 14, and 15 tooth gears.
Mychron 4 tach that is 4 races old and is perfect!
Rolling kart stand.
Tires:
Set1- SS-11's cut by B Scuffed. 2 race days on them
Set2- SS-33a's cut by B scuffed. 40 laps on them
Set3- Right side SS-33a's with one feature on them cut by Tom Dawson
Set4- Right Side SS-33a's Cut for indoors by Tom Dawson (New)
Also have two Indoors left rears cut to the cords by Tom Dawson both are new.
Wheels:
10" 6
8.5" 2
8.25" 4
6" 2
and two 10" that are a little beat up. But very usable.
Spares:
New front spindle's
Good Tie rods with hiems
Extra bearings
about 25 pounds of lead
extra air cleaners.
Some boxes of just about any extra's you would need to race.
Also have a 2003 6x12 foot inclosed trailer with ramp set up for kart racing. It is very nice.
for pix pm me phone number or e-mail address
kartracer27m@aol.com
Engines:
#1 Dual Bearing Flathead built by Ron Chaffin, DX5 cam, AAA carb, Coated header, Very Nice looking engine. Fresh.
#2 Dark Side Racing Engines Dual Bearing. Originally built by Hi Tech and was a house kart engine. 96-3 cam and coated header. Very strong engine! Right now it has 7 races on it.
#3 Is a Dual Bearing engine. All machine work was done by Dover. I can't remember who built it right now though. Has a 07-3 cam. Needs flywheel to be complete.
Dual disk bully clutch has 7 races on it since new. Comes with 12, 13, 14, and 15 tooth gears.
Mychron 4 tach that is 4 races old and is perfect!
Rolling kart stand.
Tires:
Set1- SS-11's cut by B Scuffed. 2 race days on them
Set2- SS-33a's cut by B scuffed. 40 laps on them
Set3- Right side SS-33a's with one feature on them cut by Tom Dawson
Set4- Right Side SS-33a's Cut for indoors by Tom Dawson (New)
Also have two Indoors left rears cut to the cords by Tom Dawson both are new.
Wheels:
10" 6
8.5" 2
8.25" 4
6" 2
and two 10" that are a little beat up. But very usable.
Spares:
New front spindle's
Good Tie rods with hiems
Extra bearings
about 25 pounds of lead
extra air cleaners.
Some boxes of just about any extra's you would need to race.
Also have a 2003 6x12 foot inclosed trailer with ramp set up for kart racing. It is very nice.
for pix pm me phone number or e-mail address
kartracer27m@aol.com