PDA

View Full Version : 2011 TNT Late Model



TWISTER
11-17-2011, 07:55 AM
This car was purchased late 2010 and only had 5 races in 2010 and 18 races in 2011. It went back to TNT in 2011 for the "updates". This car is straigh and won multiple races and consistantly ran in top 5 but was mostly in the top 3. Contributed to winning 2 track championships. Ran all the races towards the championships except for 6.

This is not a complete car, but would be a great item for someone wanting to update to a newer year TNT car or to have a great foundation to build a car. The items needed to put this car together are not TNT specific items. The TNT specific items are still there.
Car comes as follows.
-Black chassis
-spindles (no hubs)
-extra left front spindle
-upper and lower control arms("wide" RF set up)
-NO rack and pinion or power steering accessories(lines,reservoirs,pumps,etc.)
-steering shaft
-motor plate
-Adjustable Steel J Bar
- Jbar frame bracket
-Custom TNT torque arm with rear end plates
-Custom TNT fuel cell
-steel brakes lines (only the brake lines, rest of the braking system has been removed)
-shaker screen
-There are NO electronics on this car(msd,gauges,switches,battery cables,etc.)
-NO pedals or shifters
-4 bar plate brackets. Brackets you can hook to the chassis to allow you to run shorter 4 link bars.
-RMI bircages made for TNT cars
-LR clamp bracket for the rearend
-LR limiter chain
-battery box
-NO rearend
-May possibly have a 6th coil assy.
-radiator may "possibly" come with it.
-may possibly have a driveshaft.
-White body- If you are concerned about being "pretty" then you will need to replace the right rear quarter panel and "possibly" the RS door. If you are just concerned about going fast then you will have no worries. Decking is in great shape. All spring steel body braces.
-will throw in any other items i have to help. I may have some springs and miscellaneous items. I have got some cleaning up to do and if i run across anything i think can help get this car together i will throw it in the deal.
Asking $4500
The chassis and body alone would cost over $5500.
Car is not fully disassembled at this time but should be by the middle or end of next week. As soon as i have it in the above status i will have some pics available.
Any questions or interest please PM me or call 910-619-1478 M-F 8 a.m.-10 p.m. & Sat-Sun 10 a.m.-9 p.m..

Thank you

TWISTER
11-21-2011, 10:56 AM
Price reduced to$4000

dirtracing25
11-21-2011, 05:46 PM
can you send pictures to bigdogracing@frontiernet.net

TWISTER
11-22-2011, 11:54 AM
Sure will. Will have pics this weekend. Try and send them Friday or Saturday.

Thanks

TWISTER
11-25-2011, 06:51 PM
For all those who have requested pics, they should be ready tomorrow.

Thanks

TWISTER
11-27-2011, 12:10 AM
Pics sent to all who requested.

Thanks

TWISTER
11-28-2011, 07:42 PM
Can leave braking system on car minus the master cylinders. Calipers,pads,lines and rotors would stay. No pedals,brake shut off or hubs.
$4500 with brake system
$4000 as listed.

Several calls but no sale yet.
Pics are available at this time.

Thanks

TWISTER
11-29-2011, 02:47 PM
^^to the top^^

TWISTER
11-30-2011, 03:25 PM
To top again

TWISTER
12-02-2011, 02:52 PM
^^^^^^^^^^

TWISTER
12-04-2011, 06:23 PM
Reduced.......$4300 with full brake system $3800 without.