Ground pounder cheap!

[hadmyfunbye]

PERFECT TORQUE BAND,HOOKS UP AND HAS PLENTY OF LOWER AND HIGH RMP TORQUE
TIRED OF BURNING OFF THE RIGHT REAR? HERE IS THE FIX!
COMES WITH MORGAN RACING GAS CARB AND CHUCK NITTON ALKY CARB $1250 FREE
DART little "M" block: 400 main nodular caps, 4.125 virgin bore FRESH honed, measured and std bore barely seasoned, ready for RPM'S, magged, NEW DART cam bearings ready to assemble, in bag and in DART box
Callies medium weight crank shaft .020 main .020 rod, cleaned and magged in bag and in box ready for assembly
Wiesco std pistons, with Crower rods, cleaned, magged,bearing end checked good, in box, in bag. comes with .030 Wiesco pistons for future upgrade
Dart Pro 1 aluminum racing heads fresh grind with new seals and fresh resurface, in bag ready to scream, open competition aluminum heads
roller camshaft, roller lifters, currently roller rockers, Dart aluminum heads will accept shaft rocker assy
Brodix HVH intake matched to heads
all used bolt-ons from intake to oil pan, fanblade and pulleys to flywheel, MSD distributor
ASSEMBLY AVAILABLE
DYNO AVAILABLE
$6000.00 as kit UNASEMBLED
reply to checkit52@yahoo.com
http://www.racingjunk.com/Other/2298439/400-CI-STEEL-BLOCK-23-deg-ALUM-HEADS.html
photos available

[hadmyfunbye]

Still for sale
will deliver

[hadmyfunbye]

400 DART CHEVY ENGINE KIT
PERFECT TORQUE BAND, PLENTY OF LOWER AND HIGHER RPM TORQUE
TIRED OF BURNING OFF THE RT REAR TIRE? HERE IS THE FIX
COMES WITH MORGAN RACING GAS CARB AND CHUCK NITTON ALKY CARB $1250 FREE
CARBS ARE FRESH AND READY TO GO
DART LITTLE "M' BLOCK 400 MAINS, STD BORE HONED WITH NEW DART CAM BEARINGS, OILED, BAGGED AND IN BOX
DART PRO 1 ALUMINUM HEADS, SURFACED, FRESH VALVE JOB
BRODIX HVH INTAKE, MATCHED AND FLOWED TO HEADS
CALLIES CRANK, MEASURED, POLISHED, MAGGED, OILED, BAGGED AND IN THE BOX
WIESCO PISTONS STD, (ALSO 2ND SET OF .030 PISTONS FOR FUTURE UPGRADE INCLUDED FREE)
CROWER RODS HAVE BEEN CLEANED, SIZE CHECKED AND READY TO GO
ROLLER CAM, LIFTERS AND ROLLER ROCKERS WITH STUD GIRDLES
CARB TO 7 QT OILPAN, PULLEYS ON ALUMINUM WATERPUMP, MSD DISTRIBUTOR, FLYWHEEL, MAGNESIUM BELL HOUSING
CLEANED, MACHINED, READY TO ASSEMBLE
$6000.00
WILL DELIVER
952-400-6395
CHECKIT52@YAHOO.COM
http://www.racingjunk.com/Other/2298439/400-CI-STEEL-BLOCK-23-deg-ALUM-HEADS.html