02 with 010 updates combo chassis mod roller to turnkey or will part out cheap

[dirtnut10m]

for sale or trade 02 townsend with hamilton updateds 4 bar modified has 9 inche winters floater with 5.43 gear has all brackets on car to be run as 3 link 4 link z-link swing arm car all it needs to be race ready is oil pressure gauge mount seat motor ,trans, radiator asking 1900.00 rolling thanks 757-374-3159 or dirtnut10m@aol.com also has almost perfect black body and orang decking two hoods new aluminum one and fiberglass one fiberglass roof

or will part out as listed :
ford nine inche floater hub to hub with gear pinion plate j-bar 900.00
full frame with body decking steering box and shaft 500.00
fuel cell and all braided lines to front of car 150.00
all floor mounted pedals and resorviors 125.00
all pro shocks fronts and rear coilovers with springs 150.00
seat ,tach, gauge panel with water temp gauge , master shutoff, ignition panel 125.00
all 4 rims and tires 15x8 100.00
front hubs spindalls uppers lowers springs 200.00
are will sale turnkey minus trans with sbc blowproof bellhousing sbc 355 ci engine with 010 block steel crank h beam rods forged flattop pistons chevy heads worked good for .600 lift roller rockers .585 lift crane solid cam and lifters high rise aluminum intake , holley 4412 worked with 4-2 adapter , aluminum water pump ,all fans pulleys and power steering set up complete 3600.00 757-374-3159 or dirtnut10m@aol.com for pics or information thanks

[dirtnut10m]

back to top

[dirtnut10m]

turnkey minus trans 3500.00 or 1800.00 roller ????