View Full Version : Quick change tube bolts
Flyin Iowan
11-29-2011, 09:39 PM
Does everyones bolts come loose and or strip out? If so what do you do?
JR. MECHANIC
11-30-2011, 12:07 AM
I used red Loctite and torqued them according to manufacture's specs and haven't had any problems. If you stripped the threads out, I would just drill and tap one size larger and use proper torque specs.
hammond
11-30-2011, 09:07 AM
Zogg just drill the holes out to 3/8 and install a bolt and nut . Put the bolt head inside the tube and the nut on the outside . I do all quick change tubes that way even new ones .
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.